| This installation requires the use of the 75 ohm cable that
came with your VCR.
VCR must be tuned to Channel 3.
To view television and not record:
Set A/B switch to "A" position. Set television to channel 3. Select
channel to view with converter. To record one channel and watch another
channel between 2 and 13:
Select channel to be recorded on the converter. VCR must be set to
channel 3. Follow instructions that came with your VCR. Set A/B switch
to the "B" position. Use TV tuner to select the channel to view. To view
a recorded tape:
Set A/B switch to the "A" position. Follow instructions that came with your
VCR. |